Mohsen Amraei

Testing of additively manufactured aluminium material and cross-sections in compression (2025)

Engineering Structures

Zhang, Ruizhi; Amraei, Mohsen; Piili, Heidi; Gardner, Leroy

(A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä )

Microstructure, mechanical properties and cross-sectional behaviour of additively manufactured stainless steel cylindrical shells (2025)

Thin-Walled Structures

Zhang, Ruizhi; Amraei, Mohsen; Piili, Heidi; Gardner, Leroy

(A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä )

Investigation of the microstructure and mechanical properties of dissimilar joints of PBF-LB/IN718 to AISI 316L by laser welding (2025)

Welding in the World

Parchegani Chozaki, Saeid; Piili, Heidi; Afkhami, Shahriar; Amraei, Mohsen; Salminen, Antti

(A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä )

Flow and hardening behavior in the heat-affected zone of welded ultra-high strength steels (2024)

Welding in the World

Afkhami Shahriar, Amraei Mohsen, Javaheri Vahid, Ghafouri Mehran, Bjork Timo, Salminen Antti, Zhao Xiao-Lin

(A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä )

Experimental study on the fatigue crack growth rates of welded ultra-high strength steel plates (2023)

Advances in Structural Engineering

Moe YA, Hasib MT, Paul MJ, Amraei M, Ahola A, Kruzic J, Heidarpour A, Zhao X

(A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä )

Testing and Analysis of Additively Manufactured Stainless Steel Corrugated Cylindrical Shells in Compression (2023)

Journal of Engineering Mechanics

Zhang Ruizhi Z, Gardner Leroy, Amraei Mohsen, Buchanan Craig, Piili Heidi

(Vertaisarvioitu alkuperäisartikkeli tai data-artikkeli tieteellisessä aikakauslehdessä (A1))

NOLAMP- Nordic Laser Materials Processing Conference (19TH-NOLAMP-2023) (2023)

IOP Conference Series: Materials Science and Engineering

Salminen Antti, Ganvir Ashish, Piili Heidi, Amraei Mohsen, Mityakov Andrey

(Toimitustyö tieteelliselle lehdelle, kokoomateokselle tai konferenssijulkaisulle (C2))

The effects of geometric and metallurgical constraints on ultra-high strength steel weldments (2023)

Structures

Neuvonen Riku, Peltoniemi Teemu, Skriko Tuomas, Ghafouri Mehran, Amraei Mohsen, Ahola Antti, Björk Timo

(A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä )

Data related to the manufacturing and mechanical performance of 3D-printed metal honeycombs (2023)

Data in Brief

Afkhami Shahriar, Amraei Mohsen, Poutiainen Ilkka, Gardner Leroy, Piili Heidi, Wadee M. Ahmer, Salminen Antti, Björk Timo

(Vertaisarvioitu alkuperäisartikkeli tai data-artikkeli tieteellisessä aikakauslehdessä (A1))

Simulation and Its Use in Additive Manufacturing (2023)

Ghafouri Mehran, Amraei Mohsen, Gopaluni Aditya, Piili Heidi, Björk Timo, Hämäläinen Jari

(Vertaisarvioitu artikkeli kokoomateoksessa (A3))

Mohsen

Amraei

Contact

Publications

Sort by:

Testing of additively manufactured aluminium material and cross-sections in compression (2025)

Microstructure, mechanical properties and cross-sectional behaviour of additively manufactured stainless steel cylindrical shells (2025)

Investigation of the microstructure and mechanical properties of dissimilar joints of PBF-LB/IN718 to AISI 316L by laser welding (2025)

Flow and hardening behavior in the heat-affected zone of welded ultra-high strength steels (2024)

Experimental study on the fatigue crack growth rates of welded ultra-high strength steel plates (2023)

Testing and Analysis of Additively Manufactured Stainless Steel Corrugated Cylindrical Shells in Compression (2023)

NOLAMP- Nordic Laser Materials Processing Conference (19TH-NOLAMP-2023) (2023)

The effects of geometric and metallurgical constraints on ultra-high strength steel weldments (2023)

Data related to the manufacturing and mechanical performance of 3D-printed metal honeycombs (2023)

Simulation and Its Use in Additive Manufacturing (2023)