Mona Gibreel

Effect of different surface treatments on shear bond strength of autopolymerizing repair resin to denture base materials processed with different technologies (2024)

Journal of Prosthodontic Research

Gibreel Mona, Perea-Lowery Leila, Garoushi Sufyan, Wada Junichiro, Lassila Lippo, Vallittu Pekka

(A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä )

Evaluation of flexible three-dimensionally printed occlusal splint materials: An in vitro study (2023)

Dental Materials

Perea-Lowery Leila, Gibreel Mona, Garoushi Sufyan, Vallittu Pekka, Lassila Lippo

(A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä )

Effect of Surface Polishing on Physical Properties of an Occlusal Splint Material for Additive Manufacturing under Protection Gas Post-Curing Condition (2023)

Polymers

Wada Junichiro, Wada Kanae, Gibreel Mona, Wakabayashi Noriyuki, Iwamoto Tsutomu, Vallittu Pekka K, Lassila Lippo

(Vertaisarvioitu alkuperäisartikkeli tai data-artikkeli tieteellisessä aikakauslehdessä (A1))

Effect of 3D Printer Type and Use of Protection Gas during Post-Curing on Some Physical Properties of Soft Occlusal Splint Material (2022)

Polymers

Wada Junichiro, Wada Kanae, Gibreel Mona, Wakabayashi Noriyuki, Iwamoto Tsutomu, Vallittu Pekka K, Lassila Lippo

(Vertaisarvioitu alkuperäisartikkeli tai data-artikkeli tieteellisessä aikakauslehdessä (A1))

Mechanical Properties Evaluation of Three Different Materials for Implant Supported Overdenture: An In-Vitro Study (2022)

Materials

Gibreel Mona, Perea-Lowery Leila, Lassila Lippo, Vallittu Pekka K

(Vertaisarvioitu alkuperäisartikkeli tai data-artikkeli tieteellisessä aikakauslehdessä (A1))

Two-body wear and surface hardness of occlusal splint materials (2022)

Dental Materials Journal

Gibreel Mona, Perea-Lowery Leila, Vallittu Pekka, Garoushi Sufyan, Lassila Lassila

(Vertaisarvioitu alkuperäisartikkeli tai data-artikkeli tieteellisessä aikakauslehdessä (A1))

Effect of Nitrogen Gas Post-Curing and Printer Type on the Mechanical Properties of 3D-Printed Hard Occlusal Splint Material (2022)

Polymers

Wada Junichiro, Wada Kanae, Gibreel Mona, Wakabayashi Noriyuki, Iwamoto Tsutomu, Vallittu Pekka K, Lassila Lippo

(A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä )

Midline denture base strains of glass fiber-reinforced single implant-supported overdentures (2021)

Journal of Prosthetic Dentistry

Gibreel Mona, Lassila Lippo V. J., Närhi Timo O., Perea-Lowery Leila, Vallittu Pekka K.

(Vertaisarvioitu alkuperäisartikkeli tai data-artikkeli tieteellisessä aikakauslehdessä (A1))

3D-Printed vs. Heat-Polymerizing and Autopolymerizing Denture Base Acrylic Resins (2021)

Materials

Perea-Lowery Leila, Gibreel Mona, Vallittu Pekka K, Lassila Lippo V

(Vertaisarvioitu alkuperäisartikkeli tai data-artikkeli tieteellisessä aikakauslehdessä (A1))

Evaluation of the mechanical properties and degree of conversion of 3D printed splint material (2021)

Journal of the Mechanical Behavior of Biomedical Materials

Perea-Lowery Leila, Gibreel Mona, Vallittu Pekka K, Lassila Lippo

(Vertaisarvioitu alkuperäisartikkeli tai data-artikkeli tieteellisessä aikakauslehdessä (A1))

Mona

Gibreel

Contact

Publications

Sort by:

Effect of different surface treatments on shear bond strength of autopolymerizing repair resin to denture base materials processed with different technologies (2024)

Evaluation of flexible three-dimensionally printed occlusal splint materials: An in vitro study (2023)

Effect of Surface Polishing on Physical Properties of an Occlusal Splint Material for Additive Manufacturing under Protection Gas Post-Curing Condition (2023)

Effect of 3D Printer Type and Use of Protection Gas during Post-Curing on Some Physical Properties of Soft Occlusal Splint Material (2022)

Mechanical Properties Evaluation of Three Different Materials for Implant Supported Overdenture: An In-Vitro Study (2022)

Two-body wear and surface hardness of occlusal splint materials (2022)

Effect of Nitrogen Gas Post-Curing and Printer Type on the Mechanical Properties of 3D-Printed Hard Occlusal Splint Material (2022)

Midline denture base strains of glass fiber-reinforced single implant-supported overdentures (2021)

3D-Printed vs. Heat-Polymerizing and Autopolymerizing Denture Base Acrylic Resins (2021)

Evaluation of the mechanical properties and degree of conversion of 3D printed splint material (2021)