Ashish Ganvir

Laser post-processing as a surface engineering strategy for atmospheric plasma-sprayed thin-film all-solid-state battery components (2026)

Applied Surface Science

Hasani, Arman; Nayak, Chinmayee; Vinay, Gidla; Salminen, Antti; Joshi, Shrikant; Goel, Sneha; Gopal, Vasanth; Mäkilä, Ermei; Juan, Mathias; Ganvir, Ashish

(A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä )

Scalable single-step fabrication of high-entropy oxide coatings by axial solution precursor plasma spray (2026)

Journal of the European Ceramic Society

Gidla, Vinay; Björklund, Stefan; Angervo, Ilari; Ganvir, Ashish; Joshi, Shrikant

(A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä )

Enhancing Cold-Sprayed Nickel–Aluminum Bronze Coatings on Magnesium via Scanner-Based Laser Remelting (2026)

Journal of Thermal Spray Technology

Vinay, Gidla; Kant, Ravi; Piiroinen, Aki; Nayak, Chinmayee; Ganvir, Ashish; Singh, Harpreet

(A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä )

Effect of scan strategies on the tribological properties of maraging steel manufactured by PBF-LB (2026)

Tribology International

Nath, Ananya; Nayak, Chinmayee; Sharma, Ruchi; Anjum, Muhammad Ammar; Ganvir, Ashish; Salminen, Antti; Sarkar, Sagar

(A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä )

High-Resolution Synchrotron μXRD and μXRF for Local Phase and Elemental Analysis in Suspension Plasma Sprayed Environmental Barrier Coatings (2026)

Journal of Thermal Spray Technology

Nayak, Chinmayee; Hasani, Arman; Vinay, Gidla; Mäkila, Ermei; Owusu, Ebenezer; Kamboj, Nikhil; Makowska, Malgorzata Grazyna; Lynam, Alex; Romero, Acacio Rincon; Goel, Sneha; Hussain, Tanvir; Salminen, Antti; Ganvir, Ashish

(A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä )

Tribocorrosion performance of additively manufactured CuNi30 and SS-316L in marine environment: Seawater resistant alloys (2025)

Journal of Materials Research and Technology

Anjum, Muhammad Ammar; Nath, Ananya; Goel, Sneha; Mäkilä, Ermei; Sarkar, Sagar; Salminen, Antti; Ganvir, Ashish

(A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä )

Advanced synchrotron micro characterization of laser post-processed plasma sprayed LLZO solid-state battery electrolyte (2025)

IOP Conference Series: Materials Science and Engineering

Hasani, Arman; Joshi, Shrikant; Salminen, Antti; Goel, Sneha; Breard, Antonin; Juan, Mathias; Grazyna Makowska, Malgorzata; Makila, Ermei; Nayak, Chinmayee; Ganvir, Ashish

(A4 Vertaisarvioitu artikkeli konferenssijulkaisussa)

Microstructural evolution, deformation modes, and failure mechanisms in laser powder bed fusion processed nickel-free and 316L stainless steels (2025)

Materials and Design

Suman, Siddharth; Goel, Sneha; Rantala, Juhani; Nurmela, Asta; Anand, Abhinav; Ganvir, Ashish; Sui, Ran; Que, Zaiqing

(A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä )

Localized Phase and Elemental Mapping in Solid-State Lithium Battery LTO Anode Thin-Film Produced by a Novel Suspension Plasma Spray Approach (2025)

Journal of Thermal Spray Technology

Hasani, Arman; Joshi, Shrikant; Salminen, Antti; Goel, Sneha; Reuteler, Joakim; Makowska, Malgorzata, Grazyna; Ganvir, Ashish

(A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä )

Tribocorrosion behavior of nickel-free duplex and 316L stainless steels fabricated by laser powder bed fusion in artificial seawater (2025)

Journal of Materials Research and Technology

Anand, Abhinav; Nayak, Chinmayee; Mäkilä, Ermei; Que, Zaiqing; Piili, Heidi; Goel, Sneha; Salminen, Antti; Ganvir, Ashish

(A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä )

Ashish

Ganvir

Ota yhteyttä

Linkit

Julkaisut

Järjestä:

Laser post-processing as a surface engineering strategy for atmospheric plasma-sprayed thin-film all-solid-state battery components (2026)

Scalable single-step fabrication of high-entropy oxide coatings by axial solution precursor plasma spray (2026)

Enhancing Cold-Sprayed Nickel–Aluminum Bronze Coatings on Magnesium via Scanner-Based Laser Remelting (2026)

Effect of scan strategies on the tribological properties of maraging steel manufactured by PBF-LB (2026)

High-Resolution Synchrotron μXRD and μXRF for Local Phase and Elemental Analysis in Suspension Plasma Sprayed Environmental Barrier Coatings (2026)

Tribocorrosion performance of additively manufactured CuNi30 and SS-316L in marine environment: Seawater resistant alloys (2025)

Advanced synchrotron micro characterization of laser post-processed plasma sprayed LLZO solid-state battery electrolyte (2025)

Microstructural evolution, deformation modes, and failure mechanisms in laser powder bed fusion processed nickel-free and 316L stainless steels (2025)

Localized Phase and Elemental Mapping in Solid-State Lithium Battery LTO Anode Thin-Film Produced by a Novel Suspension Plasma Spray Approach (2025)

Tribocorrosion behavior of nickel-free duplex and 316L stainless steels fabricated by laser powder bed fusion in artificial seawater (2025)