Leila Perea Lowery

Bilayer Fiber‐Reinforced Composite‐Hydrogel Scaffolds With Bioactive Glass for Bone Tissue Regeneration (2026)

Journal of Biomedical Materials Research Part A

Gibreel, Mona; Ohlsbom, Roope; Perea‐Lowery, Leila; Lassila, Lippo; Puistola, Paula; Hopia, Karoliina; Miettinen, Susanna; Mörö, Anni; Vallittu, Pekka K.

(A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä )

Effect of surface treatment on the repair strength of a 3D printed denture base material (2025)

Journal of Prosthetic Dentistry

Gibreel, Mona; Garoushi, Sufyan; Perea-Lowery, Leila; Atout, Abeer Mohamed; Lassila, Lippo; Vallittu, Pekka K.

(A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä )

Effect of different surface treatments on shear bond strength of autopolymerizing repair resin to denture base materials processed with different technologies (2024)

Journal of Prosthodontic Research

Gibreel Mona, Perea-Lowery Leila, Garoushi Sufyan, Wada Junichiro, Lassila Lippo, Vallittu Pekka

(A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä )

Effect of preheating and curing lamp distance on the degree of conversion of four nanohybrid resins: An in vitro study (2024)

Journal of Clinical and Experimental Dentistry

Uribe-Hernández, Loraine; Latorre-Correa, Federico; Perea-Lowery, Leila; Ardila, Carlos M.

(A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä )

Evaluation of flexible three-dimensionally printed occlusal splint materials: An in vitro study (2023)

Dental Materials

Perea-Lowery Leila, Gibreel Mona, Garoushi Sufyan, Vallittu Pekka, Lassila Lippo

(A1 Vertaisarvioitu alkuperäisartikkeli tieteellisessä lehdessä )

Mechanical Properties Evaluation of Three Different Materials for Implant Supported Overdenture: An In-Vitro Study (2022)

Materials

Gibreel Mona, Perea-Lowery Leila, Lassila Lippo, Vallittu Pekka K

(Vertaisarvioitu alkuperäisartikkeli tai data-artikkeli tieteellisessä aikakauslehdessä (A1))

Two-body wear and surface hardness of occlusal splint materials (2022)

Dental Materials Journal

Gibreel Mona, Perea-Lowery Leila, Vallittu Pekka, Garoushi Sufyan, Lassila Lassila

(Vertaisarvioitu alkuperäisartikkeli tai data-artikkeli tieteellisessä aikakauslehdessä (A1))

Corrigendum to "Biomechanical aspects of reinforced implant overdentures: A systematic review" [J Mech Behav Biomed Mater 91 (2019) 202-211] (2021)

Gibreel MF, Khalifa A, Said MM, Mahanna F, El-Amier N, Närhi TO, Perea-Lowery L, Vallittu PK

(O2 Muu julkaisu )

Evaluation of the mechanical properties and degree of conversion of 3D printed splint material (2021)

Journal of the Mechanical Behavior of Biomedical Materials

Perea-Lowery Leila, Gibreel Mona, Vallittu Pekka K, Lassila Lippo

(Vertaisarvioitu alkuperäisartikkeli tai data-artikkeli tieteellisessä aikakauslehdessä (A1))

3D-Printed vs. Heat-Polymerizing and Autopolymerizing Denture Base Acrylic Resins (2021)

Materials

Perea-Lowery Leila, Gibreel Mona, Vallittu Pekka K, Lassila Lippo V

(Vertaisarvioitu alkuperäisartikkeli tai data-artikkeli tieteellisessä aikakauslehdessä (A1))

Leila

Perea Lowery

Ota yhteyttä

Linkit

Julkaisut

Järjestä:

Bilayer Fiber‐Reinforced Composite‐Hydrogel Scaffolds With Bioactive Glass for Bone Tissue Regeneration (2026)

Effect of surface treatment on the repair strength of a 3D printed denture base material (2025)

Effect of different surface treatments on shear bond strength of autopolymerizing repair resin to denture base materials processed with different technologies (2024)

Effect of preheating and curing lamp distance on the degree of conversion of four nanohybrid resins: An in vitro study (2024)

Evaluation of flexible three-dimensionally printed occlusal splint materials: An in vitro study (2023)

Mechanical Properties Evaluation of Three Different Materials for Implant Supported Overdenture: An In-Vitro Study (2022)

Two-body wear and surface hardness of occlusal splint materials (2022)

Corrigendum to "Biomechanical aspects of reinforced implant overdentures: A systematic review" [J Mech Behav Biomed Mater 91 (2019) 202-211] (2021)

Evaluation of the mechanical properties and degree of conversion of 3D printed splint material (2021)

3D-Printed vs. Heat-Polymerizing and Autopolymerizing Denture Base Acrylic Resins (2021)